Hexagon Metrology offers comprehensive contract dimensional inspection services. We have the nationwide facilities, the latest equipment, and expert staff to successfully deliver your contract inspection project on time and on budget.
Among the contract inspection services that we provide:
First Article Inspection (FAI)
Hexagon Metrology's knowledgeable staff is experienced in a wide range of metrology tools, including, but not limited to, ultra high precision CMMs, ROMER portable arms, and Laser scanning systems. This allows us to quickly, and more importantly, correctly, write PC-DMIS programs for part inspection.
Whether this is the first time material is provided, a full FAI, or this is a change in the design or manufacturing process, a partial FAI, we utilize our cutting-edge hardware and software to meet or exceed your stringent requirements
Our extensive aerospace experience allows us the ability to provide the inspection, verification, and documentation of the first production article.
We have developed custom report templates designed specifically for the Aerosospace industry such as an automated PC-DMIS routine that will generate an AS9102 report.
You can rely on Hexagon Metrology to perform a complete, independent, and documented physical inspection to verify that prescribed production methods have produced a fully conforming item as specified.
Production Part Inspection, Small to Large VolumeHexagon Metrology is your one stop shop for all of your metrology needs. We have a variety of measuring systems that are sure to satisfy all of your measuring needs.
For parts that are very small and delicate, we offer a full line of vision products. For your small intricate parts that are just too fragile for a touch probe to measure, try our touch free vision systems today!
For your larger parts, our large CMM machines can do it all. To name just a few, our large CMM machines can be used for inspecting large parts from:
We not only have the hardware but the knowledge to run the software as well. If you have large parts that need to be measured, we can help you get your measurements made quick and affordably with one of our many solution plans.
If you parts are too large for a CMM, we have other alternatives such as the LEICA TRACKER equipped with the T-SCAN or T-PROBE. These are a great solution for portable measurements and inspection.
When it comes to reporting, we are above the curve. We have a wide range of reporting tools at our disposal including Production Part Approval Process also known as PPAP's. Our software comes with many different reporting templates as well as the option to easily create your own custom reports.
Metrology has come a long way from digital calipers. Our precision centers are equipped with many different measuring tools. The technology we offer includes high magnification vision systems, White Light sensors, Laser scanners, Portable ROMER arms, and even large bridge CMMs. With all of these different technologies at our disposal, there is no job too big or too small for us to handle.
Fixture Qualification and Certification
Not only can we help you figure out how to fixture your parts to the CMM, we can help set up a calibration routine that will ensure your fixtures are properly holding your parts for the inspection process. When parts are not properly fixtured to the CMM, a carefully developed part program may generate useless results; let our experts help you devise the best method to hold your part on your CMM.
We have assisted customers in designing custom fixturing that will not only save inspection time but money as well.
For example, operations requiring large batches of parts to run can be be quite time consuming and costly. A significant amount of time and money can be saved through fixture qualification and certification. By retrieving the part alignment off a qualified fixture, you can simply remove each part after measuring and replace it with the next part. This effectively eliminates the need for manual alignment portion of your part program.
For high volume jobs, fixture qualification and certification is a must. Let the experts at Hexagon Metrology show you how to implement this efficiency improvement in your inspection lab.
We Provide Independent 3rd Party Verification
When it comes to quality control and inspection, a 3rd party verification is often necessary. We are able to provide outside verification that follows the current accepted standards and guidelines to insure that your parts are measured as accurately and correctly as possible. With many years of metrology experience, you can rest assured that the third party inspection and verification services we offer are held to only the highest standards.
Why use our inspection services?
A Nationwide Network
Contract inspection services are available at all of our precision centers nationwide, which are conveniently located in major manufacturing markets including Los Angeles, Seattle, Dallas/Ft Worth, Nashville, Chicago, Dayton/Cincinnati, Detroit, Charlotte and New England. If our local center doesn't have the equipment you need, chances are one of our others does. More than 40 metrology application professionals staff our nationwide centers, and are also available for on-site work at your center.
What you need – When you need it - at the right price!
Contact Us Online or Call Today! 800-274-9433 for a referral to your local center.
|© 2013 Hexagon Metrology is part of Hexagon||Privacy & Terms | Site Map|
Hexagon Metrology offers a comprehensive range of products and services for all industrial metrology applications in sectors such as automotive, aerospace, energy and medical. By empowering our customers to fully control their manufacturing processes, we enhance the quality of products and increase efficiency in manufacturing plants around the world.