We Provide Independent 3rd Party Verification
When it comes to quality control and inspection, often times, a 3rd party verification is necessary. We are able to provide outside verification that follows the current accepted standards and guidelines to insure that your parts are measured as accurately and correctly as possible. With many years of metrology experience, you can rest assured that the third party inspection and verification services we offer are held to only the highest standards.
Fast Turn Around
Time is money, Minimize your turn around time and Maximize your profits. Why wait for a program to be written or for a part to be measured if you can get it done right away. Our Applications Engineers are experienced in expediting projects in order to minimize turn around time. Whether you need help writing the part program to measure your parts or if you just need us to do the actual CMM part inspection, we can even do both, just give one of our friendly AE’s a call and let us know how we can help you today.
Expertise in Difficult to Inspect Parts such as Gears, Blades, and Complex Geometry
Our precision centers are fully stocked with the tools and machines to satisfy all of your measurement inspection needs. Not only are we stocked with the equipment and technology but we also pride ourselves on having in depth knowledge on hard to measure parts that often give quality control departments aggravation and slow down the turn around time. By turning to us for parts such as Gear, Blades and other hard to measure parts, you can be assured that your parts will be measured both quickly and correctly.
For those tough complex surface inspection to CAD measurements, we have tools such as the LEICA TRACKER.
For all of your complex gear measurements, we have special gear packages within PC-DMIS that will make your programs flow smoothly.
Nationwide Network and Local Support
Hexagon Metrology has gone out of its way to strategically place precision centers across the United States to ensure that our customers never have to look very far for help.
We have offices located in:
With several Applications Engineers working out of each of the offices listed above, we are confident that we can not only satisfy, but exceed your expectations for a metrology company. Our strong nationwide network gives us the power to have several AEs from different locations across the US working on solving new challenges together to speed up the process. The support that we are able to offer our customers is surpassed by none. We even offer onsite support to help you troubleshoot problems that you are having at your facility.
Hexagon Metrology is one of America's largest providers of Metrology contract services, including:
We offer contract programming using the following software: PC-DMIS, MM4, Quindos, MeasureMax, PowerInspect, DOCS, Metrolog and DMIS.
We can help with all your inspection needs including first article, PPAP and AS9102. We are equipped to handle both large and small batches of components of any size, offering comprehensive contract dimensional inspection services. We have nationwide facilities, the lastest equipment, and expert staff to successfully deliver your project on time and on budget.
We offer everything you need to get the best alignment services on the market.
We are a service-oriented company that provides dimensional inspection and quality consulting to all types of industry and for ALL types of tools, fixtures, and assemblies.
We develop engineering models from existing parts or tools, or create advanced techniques of data collection to optimize the fitting of surfaces to complex shapes and surfaces.
We develop effective and efficient methods of utilizing three-dimensional measurement equipment to perform tooling, fabrication and assembly of production parts.
We offer training in our 10 regional offices in NAFTA in RI, NC, MI, OH, IL, MN, TX, CA WA, Mexico and most industrial countries. Custom classes can be designed to fill any need.
We offer a full range of Metrology Services including On-Site Programming, On-Site training, On-Site portable inspection and Metrology stadding supported by Hexagon's nationwide network of offices.
We have the capability to supplement your workforce with experienced professionals, whether it is for one week or one year, Hexagon Metrology Services can meet your needs.
All of our instructors are factory direct. We offer training classes for PC-DMIS, Quindos, PowerInspect, DOCS, PolyWorks, Metrolog, Gear, Blade, SPC, GD&T, as well as other metrology related training.
All of these services and more can be performed at your facility or ours. For more information on our contract metrology services:
Contact Us Online or Call Today! 800-274-9433 for a referral to your local center.
|© 2013 Hexagon Metrology is part of Hexagon||Privacy & Terms | Site Map|
Hexagon Metrology offers a comprehensive range of products and services for all industrial metrology applications in sectors such as automotive, aerospace, energy and medical. By empowering our customers to fully control their manufacturing processes, we enhance the quality of products and increase efficiency in manufacturing plants around the world.